¡Hola amigo!

Pareces nuevo por aquí. Si quieres participar, ¡regístrate aquí!

Top Posters

ALKIMISTA69

1.-Disconnect the Power Adapter from the Power port. 2.-Press and hold the Reset button while connecting the Power Adapter to the Power port. 3.-Keep holding the button until the right LED of the last Ethernet port (port 2) starts flashing. 4.-Continue holding the button until the LED becomes ON (not flashing) after a few seconds. 5.-The LED becomes OFF after about a second, indicating the reset is complete.

Acerca de

Nombre de usuario
ALKIMISTA69
Registrado
Visitas
62
Último activo
Roles
Member

Actividad

  • ALKIMISTA69
    1.-Disconnect the Power Adapter from the Power port. 2.-Press and hold the Reset button while connecting the Power Adapter to the Power port. 3.-Keep holding the button until the right LED of the last Ethernet port (port 2) starts flashing. 4.-Continue holding the button until the LED becomes ON (not flashing) after a few seconds. 5.-The LED becomes OFF after about a second, indicating the reset is complete.
    noviembre 2014
  • ALKIMISTA69 cambió su foto de perfil.
    Thumbnail
    junio 2014
  • ipsacc
    Yo tengo un contacto en cablevision. El cual me des bloquea los puertos y libera la ip dinámica. Total y cable son la misma empresa. Mi correo es Ipsacsadecv @live.con.mx. saludos
    marzo 2014
  • ALKIMISTA69 se unió.
    Bienvenido abordo!
    octubre 2012